Losi 1/10 Slider 13.5
Vehicle Requirements: Losi 1/10th scale slider. (No other vehicles will be allowed.)
The only items that can be changed are as follows:
- Gearing: Both Pinion and Spur may be changed.
- Tires:Only Losi 1/10 Slider tires can be used. The vehicle is stock with a standard compound tires. A harder compound tire can be used for the front (LOSB7432) and rear (LOSB7462) of the vehicle. This may be necessary on carpet oval tracks where grip is optimum. The stock “orange” colored foam MUST be used in all tires. No tire additives allowed
- Battery Position: Battery can be moved forward or back to optimize handling.
- Body: Colors and paint schemes can be changed.
- Racers must use headers, roll bars, and knerf bars to keep scale look of vehicle. Racers can upgrade to chrome plated roll cage if desired
- Rear wing position can be within standard range of adjusted for improved handling.
- Front and rear wing must be used at all times. (except during non-wing programs.)
- Driver’s helmet can be removed or holes can be added to aid in cooling the esc.
- Suspension: Wheel Base can be adjusted by rear hubs and spacers only
- Shock oil viscosity
- Shock spring rate
- Different length camber link locations can be used to improve performance.
Motor: Any 13.5 turn brushless motor.
Batteries: Battery not to exceed 3200mah 2s lipo battery. Nimh batteries are permitted.
Electronics: Any ESC will be allowed.
Race Lengths: All race lengths will be 4 minutes with a maximum of 3 qualifiers and single main events.
Vehicle Minimum Weight: 4 lb. 5 oz. (stock weight of vehicle with Losi 3600NiMh Performance Spec battery used)
